Sunboost is a high-tech enterprise focusing on the R&D, manufacturing and sales of energy storage battery and solar power inverter.
UD AP Series - 800w~1600w - Low Frequency Solar Inverter
Pure sine wave solar inverter
MPPT efficiency max 90% opional built-in MPPT/PWM 30-60A controller
Parallel Function Up To Maximum 9 Units: enlarge more loads
Selectable charging current based on applocations
Automatically send signal to start generator
Hight effciency design for optimized battery performance
- UD1012AP5
- UD1312AP5
- UD1512AP5
- UD1512AP6
HYBRID SOLAR INVERTER
Product Description
-- PF 1.0 High Frequency
-- MPPT efficiency max 98%
-- BMS function for lithium battery
-- Pure Sine Wave Output
-- Overload short circuit protection
-- High Precision of Output Voltage
Product Specifications
| Model | UD1012AP5 | UD1312AP5 | UD1512AP5 | UD1512AP6 |
| Out Put Power | 1000VA/800W | 1500VA/1200W | 1500VA/1200W | 2000VA/1600W |
| Input Voltage | ||||
| Ac Input | 220VAC(standard) | |||
| Input Voltage Range | 154-264VAC+3v(Nor Model)185-264VAC士3v(uPs model) 77-132VAC±3V (Nor Model) 92-132VAC3V (UPs model) |
|||
| Frequency | 50/60Hz±5% | |||
| AC model output Voltage | The output voltage under the mains is the same as the input voltage | |||
| AC model output frequency | The output frequency under the mains is the same as the inputfrequency | |||
| Battery model output voltage | 220VAC±10% | |||
| Battery model output frequerncy | 50HZ or 60HZ±1% | |||
| Battery model output wave | Pure sine wave | |||
| Battery type | External lead-acid battery,Gel battery, water battery or Lithium battery | |||
| Battery voltage | 12VDC | 12VDC | 24VDC | 24VDC |
| Battery charging voltage | 13.7VDC | 13.7VDC | 27.4VDC | 27.4VDC |
| Maximum PV array power | 12V:800W 24V:1600W | |||
| Solar input voltage range | 12V: PWM 15V-50VDC 24V: PWM 30V-105VDC |
|||
| Maximum PV Display Open Circuit Coltage | 12V: PWM 50VDC 24V: PWM 105VDC |
|||
| Maximum solar charging current | 60A | |||
| Maximum AC charging current | 19A | 29A | 15A | 19A |
| Transfer time | ≤10ms(USP)/≤20ms(INV) | |||
| load peak ratio | (MAX) 3:1 | |||
| Pritective function | Under the mains : input overcurrent fuse Under inverter: overload protection,short circuit protection,low voltage protection, battery reverse connection protection ( fuse). |
|||
| Status Display | You can view parameters such as AC voltage, AC frequency, PVvoltage, PV current, output voltage, output frequency, battery voltage, load current and other parameters by turning the page keys. | |||
| Voice prompt | Low battery protection buzzer long beep Low battery buzzer beeps every second Machine fault buzzer beeps overload buzzer beeps When the overload is less than 130%, the buzzer will sound every second,and the output will be turned off after 30s. when the overload is greater than 150%,the output will be turned off after 300ms. |
|||
| Operationg temperature | -10℃~50℃ | |||
| Storage temperature | -15℃~45℃ | |||
| Relative temperature | 20%~90% no condensction | |||
| Noise | ＜45dB | |||
| SIZE(L*W*H)mm | 345*254*105mm | |||
| Weight | 8.32kg | 9.11kg | 9.11kg | 9.15kg |
PRODUCT STRENGTH
Products Advantages
WHY CHOOSE US?
Product Characteristics
0ne-Stop solar solution is a self-suffcient system.t is desianed to provide power to residential or other applicationsin areas without access to grid electricity or where gridpower is unreliable.
hybrid solar inverter
Low Frequency Charger Inverter
-- No load loss is small, less than half of the same power high-frequency machine
-- Pure sine wave output, can adapt to different loads
-- Output short circuit protection function
-- Multiple parameters can be adjusted according to user needs
-- Optional solar controller with PWM/MPPT
-- Optional with BMS communication function
-- RS485 communication function is optional
Production Workshop
FAQ
Tell us about your project requirements and we will figure out a solution that will meet your budget and design expectations.
